Receiving hopper:

• Straight or Broken Bottom
• Tailor-made length according to the desired storage volume
• Horizontal return conveyor
• Equipped with wheels for moving on farms
• Belt speed regulation system according to product level

Center Rotor Washer

Tromel diameter: 800 mm
Long tromel: 3 m
Overall long: 3. 63 m
Overall width : 1.35 m
Height : 1.80 m

1st part equipped with 2m long scaler plates
2nd part equipped

Technical characteristics:

• Modular food mat
• Stainless steel structure
• Adjustable ventilation by dimmer
• Belt feed speed
adjustable by dimmer

Dryer Feed Conveyor

Available in several versions depending on the flow rate and
Length

Widths: 200, 250, 300, 400, 500 or 600mm

String-operated hatches with return spring

Rollers under conveyor for belt holding

Power supply: 380V, power function

Intended to be installed before the washer,
The Rotary delimber allows for separation
the branches of the nuts that pass between
rotating shafts.

Particularly robust, it allows
to break up the bundles of leaves and
clods of earth.

Ideal for drying towers, these generators, which are quieter than axial generators, allow a sufficiently high pressure to pass through several meters of product

All equipped with electronic temperature control, they can run on propane or natural gas

From 6000 to 90000 m3/h, axipal dryers are mainly intended for false bottom dryers with a nut height of 1 m, they can be used on drying towers but require high rotation speeds resulting in a higher noise

Underground Receiving Hopper with Angle Elevator

• Several sizes available (standard in 2.50×2.50 and 3×3)
• Height according to the desired volume (up to 30m3)
• Variable speed drive on the elevator to regulate flow
• Conveyor

Rectangular receiving hopper (to be buried or ideally placed against a retaining wall)

• Several sizes available depending on the desired volume
• Bottom mat with rubber coating
• Variable speed drive on conveyor belt under hopper